clearing paper jams
Jam at Fuser Exit
warning
The fuser operates at extremely high temperature. Avoid touching the fuser.
Refer to the adjacent figure and perform these steps:
1Raise the top of the printer by firmly pressing the button on the left side
of the front panel. | OPC Drum |
|
2Tear the paper at a perforation
between the OPC drum unit and the | Perforation |
fuser unit. |
|
Fuser Unit
3Open the rear cover of the fuser unit by rotating it back and down.
caution
Pull the jammed paper toward the rear cover of the fuser unit only. Pulling the paper back over the rollers may damage the top of form sensor.
Be careful not to scratch or nick the rollers when removing the jammed paper.
Fuser Roller |
|
| Paper |
Pressure Roller | Jam |
| Rear Cover |
4Carefully pull the jammed paper from between the fuser roller and the pressure roller.
5
6
7
Close the rear cover of the fuser unit.
Reload the paper. Refer to the ªLoading Paperº section.
Close the top cover of the printer and wait for the printer to warm up.
8Press ON LINE. Printing will resume.
14 | Operator's Guide |
