Using the ontrol Panel
If your self adhesive control panel overlay has not been attached, please attach it. The printer is shipped with a thin plastic film covering the control panel plastic housing keys. This film must be removed before attaching the overlay. Remove the backing from the control panel overlay and apply the overlay to the control panel.
The control panel, located on the front right side of the printer, consists of the following:
•An LCD with two lines of 16 characters each
•Three indicators
•Seven function keys
The LCD, indicators, and function keys are described in the following sections. Refer to the Setup Guide for specific configuration procedures and information regarding the configuration menu structure.
The function keys permit you to configure the options of the printer. You can access these selections via a structured menu of options and values which are presented through messages on the LCD. To navigate through the options, use the UP, DOWN, NEXT, and PREV keys. Press ENTER to select an option that appears on the LCD.
The enter key can be locked and unlocked. The power up default is ªlocked.º
A detailed overview of the configuration menu structure is provided in the Setup Guide.
On Line | Check Indicator |
Indicator |
|
| LCD |
Job In
Process
Indicator
Operator's Guide | 3 |
