Loading Paper
note
Verify that all installation procedures in the Setup Guide have been completed before loading the paper.
Before loading paper, make sure the Paper Length and Paper Width options are set properly in the Paper Control configuration menu. Refer to the Setup Guide for details. Verify that the media meets the requirements as described on page 11.
To load paper:
1Raise the top of the printer by firmly pressing the top cover latch on the left side of the front panel.
2Insert paper into the front of the printer. Press the tension release as required to insert the paper.
3Unlock the tractors by pushing up the tractor locks.
4Adjust the width of the tractors so that the paper is in the proper position.
5Open the tractor gates on the tractor unit, place the paper on the pins, and close the tractor gates.
6Lock the tractor unit by pushing down on the tractor locks.
Top Cover Latch
Tension Release
Paper Entrance
Tractor Gate
Tractor Pins
Tractor Locks
Operator's Guide | 9 |
