![Developer Unit Cover (shown in the open position)](/images/new-backgrounds/141718/14171869x1.webp)
replacing printer consumables
note
If toner is spilled, use a toner vacuum to clean up the loose toner. Do not use water to clean the toner from the printer. Any toner remaining on clothes can be removed with a cloth dampened in cold water; never use hot water to remove toner from clothes or skin. Use care when handling toner.
Do not turn off the printer during a print job to add toner; otherwise, all unprinted data will be lost. Once the toner is added and the cover is closed, press ON LINE to continue printing.
When the toner is low, the printer will stop and the LCD will show:
Refer to the adjacent figure and perform these steps:
1Raise the top of the printer by firmly pressing the button on the left of the front panel.
03 ADD TONER AND CHK WASTE BOTTLE
Developer Unit Cover (shown in the open position)
2Open the toner bottle and attach the spout.
3Carefully open the developer unit cover.
caution
Do not squeeze the toner bottle as you pour the toner. Doing so could cause the loose toner to be blown out of the hopper and contaminate the printer and soil hands and clothes. If the toner bottle does not empty completely, gently tap the end of the bottle while holding it over the hopper.
4Carefully pour the toner into the developer unit. Make sure to spread the toner evenly from side to side.
Toner Bottle (with spout attached)
Operator's Guide | 25 |