replacing printer consumables
caution
Only add Starter Toner to the developer unit during installation. DO NOT ADD TONER.
Toner should only be added following a toner low message on the control panel LCD. (The starter toner will print approximately 200 pages at 5%.)
The procedure on page 24 shows a toner bottle being used. Make sure you use starter toner from the developer unit kit.
7Add the starter toner that comes with the developer unit kit in the same manner as directed on page 24.
8Verify that the developer unit cover is closed.
9Close the top cover of the printer.
32 | Operator's Guide |
