loading paper
7To ensure that the printer will start at the top of a page, check the following:
•The leading edge should be straight; not torn, crooked, or curled.
•The leading edge of the paper should not extend beyond the tractors. This allows the printer to set the top of form accurately and automatically at the leading edge of the paper.
8Close the top cover of the printer.
After the paper is loaded and the top cover is closed, the printer automatically sets the top of form at the leading edge of the paper.
ON LINE must be lit to begin printing. If it is not, press the ON LINE key.
ote
Repeat the paper loading procedure whenever top of form must be reset (e.g., after clearing a paper jam, loading new paper, etc.). For details on clearing paper jams, refer to the ªClearing Paper Jamsº section.
If the printer runs out of paper during printing, you do not need to turn power off to replace paper. If power is maintained, the printer will resume printing automatically after the paper has been replaced.
10 | Operator's Guide |
