clearing paper jams
After removing the jammed paper, reload paper as described in the ªLoading Paperº section. To clear the printer, close the top cover and press ON LINE. For most emulation modes, the jammed pages will automatically be reprinted. After printing, verify that no pages remain unprinted.
If a paper jam occurs while running either a test print or a configuration printout, pressing online is not necessary to resume printing.
Jam at Fuser Input
warning
The fuser operates at extremely high temperature. Avoid touching the fuser.
Refer to the adjacent figure and perform these steps:
1Raise the top of the printer by firmly pressing the button on the left side of the front panel.
2Tear off the paper at the perforation nearest the OPC drum unit and remove the paper.
3Reload the paper. Refer to the ªLoading Paperº section.
4Close the top cover of the printer and wait for the printer to warm up.
5Press ON LINE. Printing will resume.
OPC Drum
Perforation
Loose Toner | Paper |
| Jam |
Operator's Guide | 13 |
