clearing paper jams
Tractor Feed
warning
The fuser operates at extremely high temperature. Avoid touching the fuser.
Refer to the adjacent figure and perform these steps:
1Raise the top of the printer by firmly pressing the button on the left side of the front panel.
2Open the rear cover of the fuser unit by rotating it back and down.
3Pull and remove the tractor feed strips from between the fuser rollers or the tractor feed strips between the tractors.
4At the closest perforation, tear off the paper and pull it out from the back of the fuser rollers in the fuser unit.
caution
Pull the jammed paper toward the rear cover of the fuser unit only. Pulling the paper back over the rollers may damage the top of form sensor.
Be careful not to scratch or nick the rollers when removing the jammed paper.
5Reload the paper. Refer to the ªLoading Paperº section.
6Close the rear cover of the fuser unit.
7Close the top cover of the printer and wait for the printer to warm up.
8Press ON LINE. Printing will resume.
OPC Drum
Perforation
Fuser
Unit
Tractor
FeedRear Cover
Strip
Operator's Guide | 15 |