LG-TD7130
On-screen Icons
The phone screen displays several
Icons | Descriptions |
Displays the strength of the signal received by the phone and cur- rent signal strength is indicated by the number of bars displayed on the screen.
No service
The phone is not receiving a system signal.
In use
A call is in progress.
*No icon indicates the phone is in standby mode. 1x circuit - in use
1x packet - in use
1x packet - in dormant Digital circuit - in use
1x service is available. Digital service is available.
In Vibrator or Vib+Ring or
When the ringer type is ‘Lamp+Mute’ or when the ringer volume is ‘Off’.
In
Roaming. The phone is outside of the home service area.
Text & Voice Msg
Only Text Msg
Only Voice Msg
MMS Msg (BREW)
Driving Mode is selected.
Automatic answering mode is selected.
Shows your current battery charge strength. (Icon shown fully charged) (Icon shown charging)
Using the Battery Pack
Charge the battery fully before the initial use of the phone.
The phone comes with two rechargeable batteries. Keep the battery charged while not in use in order to maximize talk and standby time when using the phone.
Installing the Battery
To install the battery, insert the bottom of the battery into the opening on the back of the phone. Then, push the battery down until the latch clicks.
Removing the Battery
Turn the power off. (If power is on, a loss of stored numbers and messages may occur.)
Push the latch upwards to detach the battery.
release latch
slot
Chapter 1
Getting Started
18 | 19 |
