LG Electronics TD7130 manual Settings Menu, Call Answer Menu, Connection Menu, Modem/Fax Menu

LG-TD7130

Settings (Menu )

Call Answer (Menu )

1.Press Soft Key 1 MENU.

2.Press Settings.

3.Press Call Answer.

4.Select Open folder/Press key by using , then

press .

Connection (Menu )

Sets the data mode to dial-up networking service for desktop or laptop computer to access Internet via a data cable. The handset supports for a maximum data rate of 115Kbps. The actual speed may vary according to net- work congestion, signal strength, and other variables.

1.Press Soft Key 1 MENU.

2.Press Settings.

3.Press Connection.

4.Select the item of your choice by using , then

press .

G230400 / 115200 / 19200/Fax / Enable QNC

By default, the speed is set to 115200. Whenever you try to change data speed with this menu, ensure that the data speed of your PC is same as new one of handset. The mobile phone will work with the PC properly only when the serial port settings on both the PC and your phone.

LG-TD7130

Enable QNC: Activates QNC(Quick Network Connection) in CSD(Circuit Switched Data) for all data connections (dial-up, even WAP and BREW). The connection speed for QNC is 14400, and Dormant mode is not supported in this mode. When you want to access data service outside CDMA 1x coverage area of Telstra Mobile, but inside CDMA Digital area, use this Enable QNC option.

Modem/Fax (Menu )

Sets the phone mode to receive the data from the other party.

1.Press Soft Key 1 MENU.

2.Press Settings.

3.Press Modem/Fax.

4.Select the item of your choice by using , then

press .

G Deactivate / Modem / Fax

Voice Privacy (Menu )

Sets the voice privacy feature for CDMA calls as Standard Mode or Enhanced Mode. CDMA offers inherent voice privacy.

1.Press Soft Key 1 MENU.

2.Press Settings.

3.Press Voice Privacy.

Chapter 3

Menu Features

62 63