Manuals / Brands / Home Audio / CD Player / Sony / Home Audio / CD Player

Sony CMT-CP500MD Optional components, Tuner

1 56

Download 56 pages, 577.31 Kb

Troubleshooting (continued)

Optional components

There is no sound.

•Refer to General item “There is no sound” on page 47 and check the condition of the system.

•Connect the component properly (see page 43) while checking:

–if the cords are connected properly.

–if the cord plugs are firmly inserted all the way.

•Turn on the connected component.

•Refer to the operating instructions included with the connected component and start playing.

The sound is distorted.

•Set the volume of the connected component lower.

Tuner

There is severe hum or noise (“TUNED” or “STEREO” flashes).

•Set the proper band and frequency (see page 34).

•Connect the antenna properly (see page 6).

•Find a place and an orientation that provide good reception, then set up the antenna again.

If you cannot obtain good reception, we recommend you connect a commercially available external antenna.

•The supplied FM lead antenna receives signals along its entire length, so make sure you extend it fully.

•Locate the antennas as far away from the speaker cords as possible.

•Consult your nearest Sony dealer if the supplied AM antenna wire has come off the plastic stand.

•Try turning off surrounding electrical equipment.

A stereo FM program cannot be received in stereo.

•Press STEREO/MONO until “STEREO” appears in the display.

•See “There is severe hum or noise (“TUNED” or “STEREO” flashes)”, and check the antenna condition.

Cyclical static noise is heard while recording on an MD.

•Adjust the antenna orientation and position until the noise stops.

If the system still does not operate properly after performing the above measures, reset the system as follows:

1Disconnect the power cord from the wall outlet.

2Reconnect the power cord to a wall outlet.

3Press `/1.

4Press TUNER BAND, CD EJECTZ, and REC MODE at the same time.

50

Contents

Page WARNING Table of Contents Parts Identification Main unit Remote control Getting Started Hooking up the system Inserting two size-AA(R6) batteries into the remote control Setting the time Conserving power in standby mode Loading the CD Playing the CD Other operations Programming the CD Using the CD display Labeling a CD Checking the disc titles Erasing a disc title MD — Play Loading the MD Playing the MD Programing the MD tracks Using the MD display MD — Recording After recording Recording a CD on an MD with high speed —CD-MD High-SpeedSynchro Recording Recording a CD on an MD and a tape at the same time Recording a tape on an Recording on an MD manually Starting recording with 6 seconds of prestored audio data Recording tips Recording for long times Marking track numbers Making a space between tracks 3 seconds long — Smart Space Adjusting the recording level MD — Editing Before you start editing Before editing After editing Labeling an MD After recording 1 Press MD on the remote to switch the function to MD — MD Editing Copying a disc or track title Checking the titles Erasing the titles Erasing recordings Erasing a single track — Track Erase Function Erasing all tracks — All Erase Function Erasing a portion of a track — A-BErase Function Moving recorded tracks Dividing recorded tracks Combining recorded Undoing the last edit Changing the recording level after recording Changing the overall recording level Fade-inand Fade-out Recording Page Tuner Presetting radio stations Listening to the radio Labeling the preset stations Using the Radio Data System (RDS) Receiving RDS broadcasts Loading a tape Other Operations Playing a tape Tape — Recording Recording a CD on a tape Recording an MD on a tape Recording on a tape Adjusting the sound Falling asleep to music Waking up to music — Daily Timer Press CLOCK/TIMER SET on the remote 5 Set the starting time 6 Set the stopping time by repeating step Timer recording radio programs Optional Components Hooking up the optional components Additional Information Precautions Notes on CDs Note on CD-R/CD-RWplayback Cleaning the cabinet To save a tape permanently Before placing a cassette in the tape deck System limitations of MDs “Disc Full!” appears before the MD has reached the maximum recording time “Disc Full!” appears before the maximum number of tracks (255) is reached Some tracks cannot be combined with others The sound may drop-outwhile searching the edited tracks Troubleshooting General CD Player MD Deck Tape Deck Optional components Self-diagnosisdisplay Messages Self-diagnosisdisplay (continued) Specifications Specifications (continued) CD player section Tape player section MD deck section Tuner section General