4 Press ENTER/START.
The tape deck stands by for recording and the MD deck pauses for play.
When you want to record on the reverse side, press TAPE nNso that “ n” appears in the display.
5 Press PLAY MODE DIRECTION repeatedly until appears to record on
one side or (or ) to record on both sides.6 Verify that “Press START” flashes in the display. Then press ENTER/START.
MD playing and tape recording start.
To stop recording
Press MD xor TAPE x.
Note
If the tape becomes full during recording, the MD deck and the tape deck stop automatically.
Tips
•You can record only your favorite MD tracks with MD Program Play. After step 2, follow the same procedures as from step 1 to 5 in MD Program Play (see page 14). Then go to step 3.
•When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.
•If you select both sides recording and the tape reaches the end of the front side
Recording on a tape
manually
— Manual Recording
With manual recording, you can record just the portions you like from a CD or an MD on a tape. You can also record a radio program.
You can use Type I (normal) tape.
1 Load a recordable tape.
2 Press FUNCTION repeatedly to select the desired source to record.
3 Press TAPE REC z.The tape deck stands by for recording. When you want to record on the reverse side, press TAPE nNso that “ n” appears in the display.
4 Press PLAY MODE DIRECTIONrepeatedly until |
| appears to record on |
one side or | (or | ) to record on |
both sides. |
|
|
5 Press TAPE Xand then start playing the desired source to record.
To stop recording
Press TAPE x.
Tips
•When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.
•If you select both sides recording and the tape reaches the end of the front side
39