Chapter 3: Installation
3.5 Connecting a USB Device
1.Install any software required to operate the USB device(s). Refer to the documentation for the USB device(s), as required.
2.Connect the USB device to the device port on the REX unit.
3.Check that the device is detected and installed properly in the operating system.
3.6 Compatibility
The extender complies with USB 1.1 and USB 2.0 specifications governing the design of USB devices. However, we do not guarantee that all USB devices are compatible with the extender, because there are a number of different configurations that may impact the operation of USB devices over extended distances.
Page 16 | IC401A User Manual | |
|
|