Attention:
vInstall the server only in a rack cabinet that has perforated doors.
vDo not leave open space above or below an installed server in your rack cabinet. To help prevent damage to server components, always install a filler panel to cover the open space and to help ensure proper air circulation. See the documentation that comes with the rack cabinet for more information.
3.Connect the cables and power cords. See “Connecting the cables” on page 25 for more information.
4.Update the server configuration. See “Updating the server configuration” on page 26 for more information.
Installing the cover
To install the cover, place it into position and slide it forward.
Connecting the cables
The following illustrations show the locations of the input and output connectors on the front and rear of the server.
Front
1 USB 1 connector | 2 USB 2 connector |
Chapter 2. Installing optional devices 25
