Lenovo 6436, 6438, 6437, 6435 manual To install an adapter, complete the following steps

To install an adapter, complete the following steps:

1.Read the safety information that begins on page v and “Installation guidelines” on page 11.

2.Turn off the server and peripheral devices, and disconnect the power cord and all external cables. Remove the cover.

3.If you have installed an optional PCI-X riser-card assembly, disconnect the riser-card power cable
1 from the riser-card assembly.

4.Grasp the riser card at the front and rear edges and lift to remove the riser-card assembly
1. Place the riser-card assembly on a flat, static-protective surface.

5.Remove the expansion-slot cover on the slot that you intend to use.

Attention: PCI expansion-slot covers must be installed on all vacant slots. This maintains the electronic emissions characteristics of the server and ensures proper cooling of server components.

6.Follow the instructions that come with the adapter to set any jumpers or switches.

20ThinkServer RS110 Types 6435, 6436, 6437, and 6438: Installation Guide