Lenovo 6437, 6438, 6436, 6435 manual Remote Supervisor Adapter, Mounting bracket, SlimLine

1	Remote Supervisor Adapter II	3	Mounting bracket
	SlimLine
2	Mounting bracket	4	Mounting bracket retention latch

1.Read the safety information that begins on page v and “Installation guidelines” on page 11.

2.Turn off the server and peripheral devices, and disconnect the power cord and all external cables. Remove the cover.

3.If you have installed an optional PCI-X riser-card assembly, disconnect the riser-card power cable
1 from the riser-card assembly.

4.Grasp the riser-card assembly at the front and rear edges and lift to remove it from the server. Place the riser-card assembly on a flat, static-protective surface.

5.Put the protective plastic cover that came with the adapter on the Remote Supervisor Adapter II SlimLine.

6.Turn the Remote Supervisor Adapter II SlimLine so that the keys on the connector align correctly with the connector on the system board.

Chapter 2. Installing optional devices 23