Lenovo 6436 Error code, Description, Action, Maintenance Manual on the, ThinkServer Documentation

Table 4. Abbreviated list of POST error codes (continued)

v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved.

v See the parts listing in the Hardware Maintenance Manual to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained service technician.

Error code	Description	Action
289	A failing DIMM was disabled.	1. Make sure that the DIMM is
			installed correctly (see
			“Installing a memory module”
			on page 14).
		2.	Reseat the DIMM.
		3.	Replace the DIMM.
178x	Fixed disk error.	1. Run the hard disk drive
	Note: x is the drive that has the
			diagnostic tests on drive x (see
	error.
			“Running the diagnostic
			programs” in the Hardware
			Maintenance Manual on the
			ThinkServer Documentation
			DVD).
		2.	Reseat the following
			components, depending on the
			server model:
			v Hot-swap models: Hard disk
			drive x
			v Simple-swap models:
			a. Hard disk drive x
			b. Hard disk drive x cable
		3.	Replace the following
			components one at a time,
			depending on the server
			model, in the order shown,
			restarting the server each time:
			v Hot-swap models:
			a. Hard disk drive x
			b.	Hard disk drive
				backplane
			c.	(Trained service
				technician only) System
				board
			v Simple-swap models:
			a. Hard disk drive x
			b. Hard disk drive x cable
			c.	(Trained service
				technician only) System
				board
180x	A PCI adapter requested a	Run the Configuration/Setup Utility
	resource that is not available.	program and make sure that the
		resources that are needed by the
		PCI adapter are available.

40ThinkServer RS110 Types 6435, 6436, 6437, and 6438: Installation Guide