![](/images/backgrounds/16774/16774-209x1.png)
— Program Play
You can make a program of up to 28 tracks in the order you want them to be played.
1 Press CD (CD/REMAIN on the remote), then place a CD.
2 Press ENTER/PGM (TUNER MEM/ ENTER/PGM on the remote) repeatedly until “00 PR.01” appears in the display.
3 Turn ./>clockwise or counterclockwise (or press .or > on the remote) until the desired track appears in the display.
Programed step number
Selected track number (including selected track)
4 Press ENTER/PGM (TUNER MEM/ ENTER/PGM on the remote).
The track is programed. The next program step number appears, and “PROGRAM” flashes.
5 To program additional tracks, repeat steps 3 to 4.
6 Press u.
Program Play starts.
To | Do this |
Check the total | Press ENTER/PGM (TUNER |
number of | MEM/ENTER/PGM on the remote) |
programed | repeatedly in stop mode. Each time |
tracks | you press the button, the selected |
| track number and the programed |
| step number appear in the display |
| in turn. |
|
|
Cancel Program | Press xtwice until “PROGRAM” |
Play | disappears from the display. The |
| program you made will be erased. |
|
|
Tip
The program you made remains after Program Play finishes. When Program Play remains in the system’s memory, “PROGRAM” flashes. To play the same program again, press CD (CD/REMAIN on the remote) and ENTER/PGM (TUNER MEM/ENTER/ PGM on the remote), then press u.
CD
9GB