Step 2: Setting the time

You must set the time before you can use the timer functions.

The clock is on a 24-hour system for the European model, and a 12-hour system for other models. The 24 hour system model is used for illustration purposes.

Set the time before turning on the power.

1 2 3

4 5 6

7 8 9

10/0 >10

+

N X x –

–+

.>

m M

2,3

+

1

 

–

2,3

 

 

1 Press CLOCK/TIMER SET while the power is off.

The hour indication flashes.

3 Press +/–to set the minute then press

ENTER.

The clock starts.

To change the time

You can change the preset time while the power is on.

1Press CLOCK/TIMER SET.

2Press +/–repeatedly until “ SET CLOCK” appears then press ENTER.

3Repeat steps 2 and 3 of “ Setting the time” .

Tips

•If you have made a mistake, start again from step 1.

•The built-in clock shows the time in the display while the power is off.

•The upper dot flashes for the first half of a minute (0 to 29 seconds), and the lower dot flashes for the last half of a minute (30 to 59 seconds).

Started Getting

2 Press +/–to set the hour then press

ENTER.

The minute indication flashes.

9