Maytag MDB4100, MDB3100, MDBD820 Cycles, Indicator Lights select models, Sequence Water, Usage

Cycles

Located around the knob on the right side of the panel.

CYCLE	SEQUENCE WATER
	USAGE

Options (vary by model)

Located on the buttons on the left side of the panel.

Temp Boost turns on the heating element for additional time during the prewash and final rinse portions of the cycle. The Temp Boost option helps ensure proper water

Heavy Wash is for heavily soiled dish loads.

Normal Wash is for loads containing dishes with normal amounts of food soils.

Light Wash is for washing lightly soiled loads.

Rinse Only is for rinsing dishes being held until the dishwasher is full. This helps reduce the potential for odors.

Prewash

Prerinse

Main Wash

Prerinse

Hi-Temp Rinse

Dry

Prewash

Main Wash

Prerinse

Hi-Temp Rinse

Dry

Main Wash

Prerinse

Hi-Temp Rinse

Dry

Rinse

9.8 Gal.

7.8 Gal.

5.8Gal.

1.9Gal.

temperature for better cleaning and drying results.

Extended Wash provides a water temperature check early in the main wash and also in the final rinse of the cycle. If necessary, the heating element turns on and the cycle extends until the water is heated to the proper tem- perature.

Select Extended Wash for best results when washing loads with tough food soils.

Sani Heat checks the main wash and final rinse tempera- ture in addition to providing additional heated dry time.

Select Sani Heat to aid in tough food soil removal, plus boost drying results.

AccuTemp™ provides a water temperature check later in the main wash, in addition to the final rinse. If necessary, the heating element turns on and water is heated to the proper temperature.

Select AccuTemp™ with any cycle (except Rinse Only) to maintain proper hot water temperature and to enhance drying results for all types of loads.

Delay Wash (select models) allows the dishwasher to be operated at a more convenient time or during off-peak energy rate hours. Simply turn the cycle selector knob to the desired number of delay hours and latch the door.

Note: Hot water is essential for optimal cleaning and drying results.

Heated Dry ON improves drying results by turning on the heating element during the dry portion of the cycle.

Heated Dry OFF turns the heating element off during the dry portion of the cycle. Towel drying of some items such as plastic and teflon may be necessary with this selection and more moisture may be noticed on the dish- washer interior.

Note: With either dry option, it is normal to notice vapor coming out of the vent area.

Indicator Lights (select models)

Delay Start glows when this cycle is selected. The light stays on until the start of the cycle.

Heating Delay glows to indicate that the cycle is being extended to heat water. The location of the symbol around the knob corresponds to when the heating delay portions of the cycle may occur.

6