1 Press TUNER BAND repeatedly until the band you want appears.

Each time you press the button, the band changes as follows:

FM yAM

2 Press PLAY/TUNING MODE repeatedly until “PRESET” appears.

3 Press TUNER +/– to select the desired station’s preset number.

Preset number* and frequency

*When you preset only one station, “ONE PRSET” appears in the display.

To

Do this

Turn off the radio

Press ?/1 to turn off the

 

power.

 

 

Adjust the volume

Press VOL +/–.

 

 

To listen to non-preset radio stations

•Press PLAY/TUNING MODE repeatedly until “MANUAL” appears in step 2, then press TUNER + or – repeatedly to tune in the desired station (Manual Tuning).

•Press PLAY/TUNING MODE repeatedly until “AUTO” appears in step 2, then press TUNER + or –. The frequency indication changes and scanning stops when the system tunes in a station (Automatic Tuning).

To cancel the Automatic Tuning

Press PLAY/TUNING MODE.

Tips

•You can switch from another source to the tuner by pressing TUNER BAND (Automatic Source Selection).

•If you press TUNER BAND while the power is off, the power turns on and the system tunes in the last received station automatically (One Touch play).

•To improve broadcast reception, reorient the supplied antenna or connect an optional external antenna (FM antenna only).

•When an FM program has static noise, press STEREO/MONO until “MONO” appears. There will be no stereo effect, but the reception will improve. Press again to restore the stereo effect.

Operations Basic

15