Power
Connect the power cord to a wall socket. If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor).
When carrying this system
1Remove a disc to protect the CD mechanism.2Press CD to select the CD function.3Hold down TUNER/BAND and DSGX on the unit, and press on the unit until “STANDBY” appears.
4After “LOCK” appears, unplug the power cord.To use the remote
Slide and remove the battery compartment lid , and insert the two supplied R6 (size AA) batteries, side first, matching the polarities shown below.
NotesWith normal use, the batteries should last for about six months.
Do not mix an old battery with a new one or mix different types of batteries.
If you do not use the remote for a long period of time, remove the batteries to avoid damage from battery leakage and corrosion.
Setting the clock
Use buttons on the remote to set the clock.1 Press /to turn on the system.2 Press CLOCK/TIMER SET .If the current mode appears on the display, press / repeatedly to select “CLOCK SET” and then press ENTER .
3 Press /repeatedly to set the hour, and then press ENTER .4 Use the same procedure to set the minutes.The clock settings are lost when you disconnect the power cord or if a power failure occurs.