Playing music on this system

You can operate this system from Bluetooth headphones by connecting the system and Bluetooth headphones using

AVRCP.

1 Select a function other than the Bluetooth function.

Press FUNCTION repeatedly.

2 Establish a connection with the Bluetooth headphones.Press and hold BLUETOOTH OPR

on the unit for about 2 seconds until the BLUETOOTH indicator lights up, then release the button.

If more than one Bluetooth device that has been connected in the past is present around the system, the system attempts to connect with up to the

3 most recently connected devices. (Connection is attempted with up to 3 devices in order from the most recently connected device, and the attempts end when a connection is established.

Once the connection is established, the system display changes as follows: “CONNECT” Name of the Bluetooth device

3 Start playback of the music for the function selected in step 1.

Depending on the type of Bluetooth headphones, you can operate this system (playback, volume control, etc.) using the headphone’s controls.

For details about the operations of the Bluetooth headphones, refer to the operation manual supplied with your Bluetooth headphones.

4 Adjust the volume.

Press VOLUME +/(or VOL +/on the unit) .

To cancel the connection with Bluetooth headphones

Press and hold BLUETOOTH OPR on the unit for about 2 seconds until the BLUETOOTH indicator turns off.

Notes

If you cannot connect with paired Bluetooth headphones, perform the pairing operation between the system and the Bluetooth headphones again.

When the system is changed to a function

other than the Bluetooth function and BLUETOOTH OPR on the unit is pressed while connected to a Bluetooth device, it may take some time until a connection is made with the Bluetooth headphones.

This system stores separate volume settings

for when listening through the speakers or PHONES jack , or when listening through Bluetooth headpnoes.

Operations Basic

19GB