Listening to satellite radio
You can operate and listen to XM or SIRIUS satellite radio by connecting an optional antenna or tuner. Before using the system, connect the XM
1 Select “XM” or “SIRIUS.”
Press XM or SIRIUS (or TUNER/ BAND repeatedly).
2 Select the All Channel mode.
Press TUNING MODE repeatedly until “CAT” and “PRESET” disappear.
3 Tune in the desired channel.
Press +/(or TUNE +/on the unit) repeatedly.
4 Adjust the volume.
Press VOLUME +/(or turn the VOLUME control on the unit) .
To select a channel by Category mode1Press XM or SIRIUS (or TUNER/ BAND repeatedly).
2Press TUNING MODE repeatedly until “CAT” appears.
3Press CATEGORY +/(or CAT +/on the unit) repeatedly.
4Press +/(or TUNE +/on the unit) repeatedly.
To select a channel using the number buttons
Enter the 3 digits of the desired channel using the number buttons , then press ENTER .
To check your XM Radio ID or SIRIUS ID number
Press the number button 0 , then press ENTER to select channel 0.
Notes
If you select a channel using the number buttons in Category mode, the tuning mode changes automatically to All Channel mode.
You cannot select a SIRIUS channel using +/(or TUNE +/on the unit) if the Parental Lock is set for the channel.
Restricting access to specific channels (SIRIUS only)Parental Lock
You can restrict access to certain channels using your own password. The password is set to “0000” as the default. Change the password before you use this function for the first time (see “To change the password”).