Play does not start from the first track.

Press PLAY MODE repeatedly until both “PGM” and “SHUF” disappear to return to normal play.

Starting playback takes more time than usual.The following discs take a longer time to start playback.a disc recorded with a complicated tree structure.a disc recorded in multisession mode.

a disc that has not been finalized (a disc to which data can be added).

a disc that has many folders.

Bluetooth device

Pairing cannot be done.Move the Bluetooth device closer to the system.

Pairing may not be possible if other Bluetooth devices are present around the system. In this case, turn off the other Bluetooth devices.

Connection is not possible.

The Bluetooth device you attempted to connect does not support the A2DP and AVRCP profiles, and cannot be connected with the system.

Enable the Bluetooth function of the Bluetooth device.

The pairing registration information has been erased. Perform the pairing operation again.

While connected to a Bluetooth device, this system cannot be detected and a connection cannot be established from another Bluetooth device.

The sound skips or fluctuates, or the connection is lost.The system and the Bluetooth device are too far apart.

If there are obstacles between the system and your Bluetooth device, remove or avoid the obstacles.

If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device, or a microwave oven nearby, move them away.

The sound of your Bluetooth device cannot be heard on this system.Turn up the volume on your Bluetoothdevice first, and then adjust the volume using VOLUME +/.Severe hum or noise

If there are obstacles between the system and your Bluetooth device, remove or avoid the obstacles.

If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device, or a microwave oven nearby, move them away.

Turn down the volume of the connected Bluetooth device.

The sound from the Bluetooth headphones is distorted.

Turn down the volume of the system using VOLUME . If your headphones have a volume control, also adjust the volume using the headphone’s volume control.

Press DSGX on the unit repeatedly until “DSGX OFF” appears.

Press EQ repeatedly to select“BASS” or “TREBLE,” and then press repeatedly to turn down the level.

30GB