Before contacting technical support, refer to this section.
If thin lines appear on your screen (damper wires)
The lines you are experiencing on your screen are normal for the Trinitron monitor and are not a malfunction. These are shadows from the damper wires used to stabilize the aperture grille and are most noticeable when the screen’s background is light (usually white). The aperture grille is the essential element that makes a Trinitron picture tube unique by allowing more light to reach the screen, resulting in a brighter, more detailed picture.
Damper wires
On-screen messages
If there is something wrong with the input signal, one of the following messages appears on the screen.
If NO INPUT SIGNAL appears on the screenI NFORMA T I ON
| MON I TOR | I S WORK I NG |
| |||
|
| I NPUT | : 6 8 . 7 k H z / 8 5 H z |
| ||
|
| |||||
|
| NO I NPUT | S I GNA L |
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
| WH I T E |
|
|
|
| |
| RED |
|
|
|
| |
| GREEN |
|
|
|
| |
| B L UE |
|
|
|
|
If the monitor recognizes the frequencies of the current input signal, the horizontal and vertical frequencies are displayed.
2The input signal conditionNO INPUT SINGALThis indicates that no signal is input.
If OUT OF SCAN RANGE appears on the screen
|
|
|
|
|
|
|
|
| GB |
| I NFORMA T I ON |
|
|
|
|
|
| ||
| MON I TOR | I S WORK I NG |
|
|
| ||||
| I NPUT | : 1 3 0 | . 0 k H z / | 7 5 H z |
|
|
| ||
|
|
|
| ||||||
|
|
|
|
|
|
|
| ||
| OUT OF SCAN RANGE |
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
| CHANGE | S I GNA L | T I M I NG |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| WH I T E |
|
|
|
|
|
|
|
|
| RED |
|
|
|
|
|
|
|
|
| GREEN |
|
|
|
|
|
|
|
|
| B L UE |
|
|
|
|
|
|
|
|
1The frequencies of the current input signal
If the monitor recognizes the frequencies of the current input signal, the horizontal and vertical frequencies are displayed.
2The input signal condition
OUT OF SCAN RANGEThis indicates that the input signal is not supported by the monitor’s specifications.
3The remediesCHANGE SIGNAL TIMING appears on the screen. If you are replacing an old monitor with this monitor, reconnect the old monitor. Then adjust the computer’s graphic board so that the horizontal frequency is between 30 - 109 kHz, and the vertical frequency is between 48 - 160 Hz.
For more information, see “Trouble symptoms and remedies” on page 16.
15