Sony CPD-G500 Adjusting the shape of the picture (GEOM), Adjusting the convergence (CONV)

Adjusting the shape of the picture (GEOM)

The GEOM settings allow you to adjust the rotation and shape of the picture.

The (rotation) setting is stored in memory for all input signals. All other settings are stored in memory for the current input signal.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button to highlight GEOM and press the center of the control button again.

The GEOMETRY menu appears on the screen.

3First move the control button m/M to select the

desired adjustment item. Then move the control button </, to make the adjustment.

Select To

rotate the picture

expand or contract the picture sides

shift the picture sides to the left or right

adjust the picture width at the top of the screen

shift the picture to the left or right at the top of the screen

Adjusting the convergence (CONV)

The CONV settings allow you to adjust the quality of the picture by controlling the convergence. The convergence refers to the alignment of the red, green, and blue color signals.

If you see red or blue shadows around letters or lines, adjust the convergence.

These settings are stored in memory for all input signals.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button to highlight CONV and press the center of the control button again.

The CONVERGENCE menu appears on the screen.

3First move the control button m/M to select the

desired adjustment item. Then move the control button </, to make the adjustment.

Select		To
		horizontally shift red or blue shadows
		vertically shift red or blue shadows
	TOP	vertically shift red or blue shadows at
		the top of the screen
V CONVER TOP
	BOT	vertically shift red or blue shadows at
		the bottom of the screen
V CONVER
BOTTOM

12