Setup
Before using your monitor, check that the following accessories are included in your carton:
•Power cord (1)
•HD15 video signal cable (1)
•Current G3 adapter (for beige system) (1)
•Windows Monitor Information Disk (1)
•Warranty card (1)
•Notes on cleaning the screen’s surface (1)
•This instruction manual (1)
Step 1: Connect your monitor to your computer
Turn off the monitor and computer before connecting.
Notes
•Do not touch the pins of the video signal cable connector as this might bend the pins.
•When connecting the video signal cable, check the alignment of the HD15 connector. Do not force the connector in the wrong way or the pins might bend.
xConnecting to an IBM PC/AT or compatible computer
AC IN
R G B HD VD
(HD15) | (BNC) |
xConnecting to a Macintosh or compatible computer
AC IN
R G B HD VD
(HD15) | (BNC) |
to HD15
Current G3 adapter (for beige system) (supplied)*
Macintosh or | to video | HD15 video signal | |
cable (supplied) | |||
compatible computer | output | ||
|
*Connect the supplied Macintosh adapter to the computer before connecting the cable.
This adapter is compatible with Macintosh LC, Performa, Quadra, Power Macintosh, and Power Macintosh G3 series computers that have two rows of pins. If you are connecting to the other version of Power Macintosh G3 series with three rows of pins or models other than those stated above, you will need a different adapter (not supplied).
xConnecting to the five BNC connectors
AC IN
R G B HD VD
(HD15) | (BNC) |
to HD15
to video output
IBM PC/AT or compatible computer
to VIDEO IN R/G/B
HD15 video signal cable (supplied)
Refer to the preceding examples to connect to your computer.
to SYNC IN HD/VD
video signal cable
*Connect the cables from left to right in the following order:
Note
Plug & Play (DDC) does not apply to the five BNC connectors. If you want to use Plug & Play, connect your computer to the HD15 connector using the supplied video signal cable.
6