Rear Panel
Pin 1
1 | 2 | 3 | 4 | 5 |
|
|
|
|
|
1F.GND (Frame ground) tab
Connect with one of the host computer’s ground cables when the drive’s frame is not in direct contact with the computer.
1Unused
2ANALOG AUDIO connector Outputs analog audio signals.
3Configuration Jumpers See page 11 for details.
4INTERFACE CONNECTOR (SCSI bus) Connect to 50 pin SCSI host adapter.
5DC INPUT
Connect to the power supply of the host computer.
Precautions
■Installation
•Avoid placing the drive in a location subject to:
We recommend to use the drive in a horizontal or vertical position. Do not use it in a tilted position.
■Operation
•Do not move the drive during operation. This may cause it to malfunction during reading or writing.
•Avoid exposing the drive to sudden changes in temperature as condensation may form on the lens inside the drive as a result. Should the surrounding temperature suddenly rise while the drive is on, wait at least one hour before you turn off the power. Operating the drive immediately after a sudden increase in temperature, may result in a malfunction during reading or writing.
■Transportation
•Close the disc drawer before moving the drive.
•Keep the original packing materials for future transport of the drive.
8 | Location and Function of Parts and Controls | Precautions | 9 |