Ejecting the Disc

To eject the disc, press the eject button on the front panel. The tray comes out automatically.

Note:

The eject button does not work if it is disabled by the software you are using.

Opening the tray manually in an emergency

You can open the tray manually when it fails to come out by means of the eject button or software commands. To do this, follow the procedure below:

1Turn off the power of your computer.

2Insert a pointed object, such as a paper clip, into the emergency eject hole and push.

Approx. 40 mm

After removing the disc from the drive unit, consult your dealer or qualified service personnel.

How to Use the Disc Locks

The disc tray has four disc locks that prevent the disc from falling when the drive is set up in vertical position.

Disc locks

Note:

When the drive is used in horizontal position, you do not need to lock the disc.

Locking and Unlocking

All of the four locks are set in the unlocked position (facing outward) when the drive is shipped from the factory. To set the lock in the locked position, turn it with your fingers until you hear a click so that it faces inward.

lockedunlocked

to unlock

to lock

20 Operating the Drive

Operating the Drive 21