Opening the Computer
Refer to your computers user manual for instructions on how to open the computer.
Mounting the Drive
Do not mount the drive at an angle, it is only designed to be operated horizontally or vertically.
Some computers chasis require mounting rails on each side of the drive when installing new drives. If your system requires these rails you should contact your computer supplier.
Connecting the Drive
The drive should be connected to the computer with the following connectors:
•DC INPUT connector.
•AUDIO OUT connector (if you plan to connect audio equipment).
•SCSI INTERFACE connector.
50 Pin SCSI INTERFACE
Connector
DC INPUT connector
AUDIO OUT connector
■DC INPUT connector
The pin assignment for the DC connector is as follows.
| GND |
+5 V DC | +12 V DC |
After matching the beveled edges, insert the plug of the power supply cable to the DC INPUT connector on the rear of the drive and push it firmly in place.
DC INPUT connector
Power supply cable
12 | Installing the Drive Unit into the Computer | Installing the Drive Unit into the Computer | 13 |