Symptom

Cause and/or corrective action

“Low Battery” appears on the

The rechargeable battery is used up completely. Charge the

display, and the CD does not play.

battery (page 11). 1)

 

Replace the dry battery with a new LR6 (size AA) alkaline

 

battery (page 10).

“Hi DC in” appears on the display.

An AC power adaptor which is rated higher than the one

 

supplied or recommended is being used. Use only the supplied

 

AC power adaptor or the car battery cord recommended in

 

“Optional Accessories” (page 32).

The CD does not play, or “No Disc”

The CD is dirty or defective. Clean it or change it.

appears on the display when a CD

Check that the CD is inserted with the label side up

is placed in the player.

(page 14).

 

 

Moisture condensation has occurred. Leave the CD player

 

aside for several hours until the moisture evaporates.

 

Close the lid of the battery compartment firmly (page 10).

 

Make sure the battery is inserted correctly (page 10).

 

Connect the AC power adaptor to an AC outlet securely

 

(page 13).

 

Press /ENTER after one second or more has passed since

 

the AC power adaptor was connected.

 

The CD-R/CD-RW in the player is blank.

 

There is a problem with the quality of the CD-R/CD-RW,

 

recording device, or application software.

 

 

“HOLD” flashes on the display

The buttons are locked. Slide the HOLD switch back

when you press a button, and the

(page 16).

CD does not play.

 

Information Additional

Playback starts from the point you stopped (resume function).

The resume function is working. To start play from the first track, press and hold /ENTER (on the remote) while the player is stopped until the first track starts playing, or open the lid of the player (page 15). Or, remove all power sources, and then insert the battery or connect the AC power adaptor again.

During playback of an ATRAC

This player is designed to stop the rotation of an ATRAC CD

CD or MP3 CD, the CD does not

or MP3 CD during playback to reduce the power consumption.

rotate but you can hear the sound

The player is not malfunctioning.

normally.

 

“No File” appears on the display

There are no ATRAC3plus/MP3 files on the CD-R/CD-RW.

after you press /ENTER or

A CD-R/CD-RW from which the data has been erased is being

when the lid of the player is

used.

closed.

The CD is dirty.

 

 

Continued

29