Symptom

Cause and/or corrective action

“Low Battery” appears on the

The rechargeable battery is used up completely. Charge the

display, and the CD does not play.

battery (page 13). 1)

 

Replace the dry battery with a new LR6 (size AA) alkaline

 

battery (page 12).

“Hi DC in” appears on the display.

An AC power adaptor which is rated higher than the one

 

supplied or recommended is being used. Use only the supplied

 

AC power adaptor or the car battery cord recommended in

 

“Optional Accessories” (page 34).

The CD does not play, or “No Disc”

The CD is dirty or defective. Clean it or change it.

appears on the display when a CD

Check that the CD is inserted with the label side up

is placed in the player.

(page 16).

 

 

Moisture condensation* has occurred. Leave the CD player

 

aside for several hours until the moisture evaporates.

 

* Moisture is likely to condense on the lense inside the CD

 

player when you bring the player from the cold outdoors into

 

the warm indoors.

 

Close the lid of the battery compartment firmly (page 12).

 

Make sure the battery is inserted correctly (page 12).

 

Connect the AC power adaptor to an AC outlet securely

 

(page 15).

 

Press after one second or more has passed since the AC

 

power adaptor was connected.

 

The CD-R/CD-RW in the player is blank.

 

There is a problem with the quality of the CD-R/CD-RW,

 

recording device, or application software.

“HOLD” flashes on the display

The buttons are locked. Slide the HOLD switch back

when you press a button, and the

(page 18).

CD does not play.

 

Playback starts from the point you

The resume function is working. To start play from the first

stopped (resume function).

track, press and hold while the player is stopped until the

 

first track starts playing, or open the lid of the player (page

 

17). Or, remove all power sources, and then insert the battery or

 

connect the AC power adaptor again.

 

 

During playback of an ATRAC

This player is designed to stop the rotation of an ATRAC CD

CD or MP3 CD, the CD does not

or MP3 CD during playback to reduce the power consumption.

rotate but you can hear the sound

The player is not malfunctioning.

normally.

 

“No File” appears on the display

There are no ATRAC/MP3 files on the CD-R/CD-RW.

after you press or when the lid

A CD-R/CD-RW from which the data has been erased is being

of the player is closed.

used.

 

The CD is dirty.

 

Continued

Information Additional

31