Notes

•When charging the batteries using the charging stand, be sure to remove the external battery case.

•During charging, the CD player and the rechargeable batteries become hot. This poses no danger.

•If you push the 5-way control key toward u lever during charging, charging stops and playback of the CD starts.

•If you place the CD player on the charging stand during play, play stops and charging starts.

•Place the CD player on the charging stand securely, aligning the V mark on the CD player with the v mark on the stand. Make sure that the OPR lamp on the CD player lights up. Wrong placement interrupts charging or play.

To remove the rechargeable batteriesPush # end to remove the batteries.When to replace the rechargeable batteries

If the battery life becomes shorter by about half, replace the batteries with new rechargeable batteries.

Note on the rechargeable batteries

If the batteries are new or have not been used for a long time, they may not be charged completely. In that case, charge them until the OPR lamp goes off and then use the CD player until the batteries are depleted completely (“Lobatt” appears in the display). Repeat this procedure several times.

Note on carrying the rechargeable batteries

Use the supplied battery carrying case to prevent unexpected heat. If the rechargeable batteries and the metallic objects are contacted, heat or fire may occur due to a short circuit.

Using the dry batteries

You can extend power by inserting rechargeable batteries in the CD player and attaching the external battery case.

1 Align the lines below PUSH as illustrated, then draw out the battery case while pressing PUSH.

Align
2 Insert two LR6 (size AA) alkaline

Connecting

batteries (not supplied) by

 

matching the 3 to the diagram in

 

the battery case. Insert the battery

 

case and lock the case by turning

toa

LOCK in the direction of the
arrow.

powersource

 

(Continued)

35-GB