Symptom

Cause and/or corrective action

During playback of an ATRAC

c The CD player is designed to stop the rotation of an ATRAC CD or

CD or MP3 CD, the CD doesMP3 CD during playback to reduce the power consumption. The
not rotate but you can hearplayer is not malfunctioning.
the sound normally.

 

“NO FILE” appears in the display after the jog lever is pressed (CD player: after you push the 5-way control key toward u) or the lid of the CD player is closed.

cThere are no ATRAC3plus/ATRAC3/MP3 files in the CD.cA CD-R/RW from which the data has been erased is being used.cThe CD is dirty.
When closing the lid of thec The CD player is reading the information on the CD. The player is
CD player, the CD starts tonot malfunctioning.
rotate.

 

The LCD display becomesc You are using your CD player at high temperatures (above 40°C/
hard to see or slows down.104°F) or at low temperatures (below 0°C/32°F). At room

 

temperature, the display will return to its normal operating

 

condition.

 

 

“ ” is flashing quickly inc The CD player has entered the preparation stage of Bookmark
the display of the remotetrack play. Change the PLAY MODE setting to “ALL”.
control, and you cannot

 

locate the beginning of the

 

track or a specific point in

 

the track.

 

You cannot operate the CDc The buttons on the CD player are kept pressed by mistake.
player properly using the

 

remote control.

 

Play is stopped abruptly.c OFF TIMER has been set. Change the setting to “OFF.”

 

 

information Additional

41-GB