Symptom

Cause and/or corrective action

Playback starts from the point you

The resume function is working. To start play from the first

stopped (resume function).

track, press while the player is stopped until the first track

 

starts playing, or open the lid of the player (page 17). Or,

 

remove all power sources, and then insert the battery or connect

 

the AC power adaptor again.

 

 

During playback of an ATRAC

This player is designed to stop the rotation of an ATRAC CD

CD or MP3 CD, the CD does not

or MP3 CD during playback to reduce the power consumption.

rotate but you can hear the sound

The player is not malfunctioning.

normally.

 

“No File” appears on the display

There are no ATRAC3plus/MP3 files on the CD-R/CD-RW.

after you press or when the lid

A CD-R/CD-RW from which the data has been erased is being

of the player is closed.

used.

 

The CD is dirty.

The LCD display becomes hard to

You are using your CD player at high temperatures (above

see or slows down.

40°C/104°F) or at low temperatures (below 0°C/32°F). At

 

room temperature, the display will return to its normal

 

operating condition.

 

 

is flashing quickly on the

The CD player has entered the preparation stage of Bookmark

display of the remote control, and

play. Change the PLAY MODE setting to normal play (no

you cannot locate the beginning

display) (page 21).

of the track or a specific point in

 

the track.

 

Even though you have not selected

If you have selected a playback option other than Bookmark

Bookmark play, (Bookmark)

play, (Bookmark) flashes.

flashes.

 

Play stopped abruptly.

The off timer has been set. Change the setting of “TIMER” to

 

“OFF” (page 28).

 

The rechargeable battery or the dry battery is used up

 

completely. Charge the rechargeable battery (page 11),

 

or replace the dry battery with a new LR6 (size AA) alkaline

 

battery (page 13).

You cannot operate the player,

This phenomenon may occur, depending on the CD you are

and a sequence of 8 numbers or

using. Remove all power sources, and then insert the battery

letters appear on the display of

or reconnect the AC power adaptor. Try to operate the player

the remote.

again. If the problem persists, consult your nearest Sony dealer.

 

 

 

Continued

Information Additional

33