Preparing a Power
Source (Rechargeable Battery)
Charge the rechargeable battery before using it for the first time or when it is depleted.
To maintain the original battery capacity longer, charge the battery only when it is completely depleted (“Lo Batt” appears on the display).
Since the supplied charging stand is for this player only, you cannot charge any other model using this stand.
1Slide the OPEN switch to open the lid of your player.
OPEN switch
2Open the battery compartment lid inside the player.
| Raise | |
Battery |
| |
compart- | Press | |
ment lid | ||
|
3Insert the
Insert the end first.
4Connect the AC power adaptor to the supplied charging stand. Then insert the player into the charging stand, aligning the mark on the CD player with the mark on the stand.
The OPR lamp on the CD player flashes, then lights up.
When the remote is connected, “Charging” flashes and the indicator
sections of (battery) light up in succession in the remote display.
to an AC outlet
AC power adaptor
OPR lamp
Align with .
Charging stand
Terminals
to DC IN 3V
When the battery is completely charged, the OPR lamp goes off and “Charging” disappears.
Continued
Started Getting
11