Notes

Do not charge any rechargeable battery other than an NH-14WM (supplied) or NH-10WM (not supplied) using this AC power adaptor.

If you press during charging, charging stops and playback of the CD starts.

If you connect the AC power adaptor to the player during playback, play stops.

During charging, the player and the rechargeable battery become hot. This poses no danger.

Take out the rechargeable battery when the player is not to be used for a long time.

To remove the rechargeable battery

Push the end of the rechargeable battery.

Note on the useful life of the rechargeable battery and when to replace it

If the battery is new or has not been used for a long time, it may not charge completely.

In that case, charge it until the OPR lamp goes off and then use the player until the battery is completely depleted (“Lo Batt” appears on the display). Repeat this procedure several times.

When the battery life is still shorter by about half of a normal charge after trying this procedure, replace the battery with a new rechargeable battery.

Note on carrying the rechargeable battery

Use the supplied battery carrying case to protect against unexpected heat. If the rechargeable battery comes into contact with the metallic objects, heat or fire may occur due to a short circuit.

When using a dry battery

You can extend the power available by using a dry battery, together with a rechargeable battery by attaching the external battery case. Make sure to remove the AC power adaptor when attaching the external battery case. The battery in the player and that in

the external battery case are discharged simultaneously.

Notes

When using the rechargeable battery and dry battery together to extend power, use a fully charged rechargeable battery and new dry battery.

When you use the CD player on battery power, use an alkaline battery only. If you use any other type of battery, the player may not give its full performance. A decrease in battery life, etc. may occur.

1Insert an LR6 (size AA) alkaline battery (not supplied) by matching the to the diagram inside the battery case and close the battery case lid.

2Attach the battery case to the player securely and fasten the screw in the direction of LOCK. Connect the battery case to EXT BATT jack.

12