Symptom

Cause and/or corrective action

Playback starts from the point you stopped (resume function).

The resume function is working. To start play from the first track, press while the player is stopped until the first track starts playing (page 16), or open the lid of the player. Or, remove all power sources, and then insert the battery or connect the AC power adaptor again.

During playback of an ATRAC CD or MP3 CD, the CD does not rotate but you can hear the sound normally.

This player is designed to stop the rotation of an ATRAC CD or MP3 CD during playback to reduce the power consumption. The player is not malfunctioning.

“No File” appears on the display

There are no ATRAC/MP3 files on the CD-R/CD-RW.

after you press or when the lid

A CD-R/CD-RW from which the data has been erased is being

of the player is closed.

used.

 

The CD is dirty.

The LCD display becomes hard to

You are using your CD player at high temperatures (above

see or slows down.

40°C/104°F) or at low temperatures (below 0°C/32°F). At

 

room temperature, the display will return to its normal

 

operating condition.

is flashing quickly on the display of the remote control, and you cannot locate the beginning of the track or a specific point in the track.

The CD player has entered the preparation stage of Bookmark play. Change the PLAY MODE setting to normal play (no display) (page 20).

Even though you have not selected Bookmark play, (Bookmark) flashes.

If you have selected a playback option other than Bookmark play, (Bookmark) flashes.

Play stopped abruptly.

The off timer has been set. Change the setting of “TIMER” to

 

“OFF” (page 27).

 

The rechargeable battery or the dry battery is used up

 

completely. Charge the rechargeable battery (page 11),

 

or replace the dry battery with a new LR6 (size AA) alkaline

 

battery (page 12).

32