Connecting Other Devices
You can listen to CDs through a stereo system and record CDs on a cassette tape. See the instruction manual that comes with the device you want to connect.
Be sure to turn off all devices before making the connections and changing the settings explained below.
to (headphones)/
LINE OUT
Connecting cord (minijack, not supplied)
Left (white)
Right (red)
AV amplifier, active speaker, cassette recorder, etc.
You need to change the setting for “AUDIO OUT” so that sound is output to the connected device. The settings of “AUDIO OUT” are shown below. To make those settings, see page 25, 27.
Connected device | Setting |
Headphones | HEADPHONE |
|
|
Device connected using | LINE OUT |
the connecting cord |
|
|
|
When you connect another device, set this to “LINE OUT.” When the setting is “LINE OUT,” volume cannot be adjusted using either the player or the remote, and the sound function does not work.
Notes
•Before you play a CD, turn down the volume of the connected device to avoid damaging the connected speaker.
•Use the AC power adaptor for recording. If you use the rechargeable battery or a dry battery as a power source, the battery may become completely depleted in the middle of recording.
•To record high quality CD sound, set
Playback
29