Presetting radio stations
You can preset up to 51 stations (for USA and Canadian models) : 7 for TV, 4 for WB, 30 for FM and 10 for AM or 40 stations (for other models) : 30 for FM and 10 for AM.
1 Press RADIO ON/BAND to turn on the radio.
2 Press RADIO ON/BAND to select the band.3 Press MEMORY for 2 seconds or more.The preset number will flash in the display.
FM01 87.50 MHz4 Press DISPLAY/MENU for 2 seconds or more.The CD player starts scanning the stations from the lower frequencies and stops for about 3 seconds when a station is received.
5 If you want to preset the received station, press DISPLAY/MENU while the preset number is flashing.
The received station is preset on the preset number 1 and the CD player starts scanning for the next receivable station. If you do not press DISPLAY/MENU within the 3 seconds, the CD player will start scanning for the next receivable station without storing the station.
6 Repeat step 5 until all receivable stations are preset.If the stations have already been stored, the newly preset stations will replace the old ones.
Presetting stations manually1 Press RADIO ON/BAND to turn on the radio.
2 Press RADIO ON/BAND to select the band.
3 Press and hold MEMORY until the preset
number flashes in the display. | Using | |||
|
|
| ||
| FM 01 |
| ||
|
| the | ||
| 87.50 MHz |
| ||
|
|
| radio | |
From this step on, start the next operation | ||||
| ||||
within 30 seconds after you finished the |
| |||
previous operation. If 30 seconds pass |
| |||
with nothing done, the preset number |
| |||
stops flashing which shows that the CD |
| |||
player has exited the preset memory |
| |||
standby mode. If this happens, start from |
| |||
step 3 again. |
| |||
|
| (Continued) |
|
27