BConnecting to a power source
Using the dry batteries
Use only the following dry battery type for your CD player:
• LR6 (size AA) alkaline batteries
For the battery life, see “Specifications.”
Note
Be sure to remove the AC power adaptor when using the dry batteries.
1 Slide OPEN to open the lid of your CD player, then open the battery compartment lid inside the player.
2 Insert two LR6 (size AA) batteries by matching the 3 to the diagram in the battery compartment and close the lid until it clicks into place.
Insert the # end first (for both batteries).
When to replace the batteries
You can check the remaining power of the batteries in the display.
t 
t 
t 
t
t Lo batt*
* Beep sounds.
When the batteries are depleted, replace both batteries with new ones.
Notes
• | The indicator sections of | roughly show the | |
| remaining battery power. One section does not | ||
| always indicate | ||
• | Depending on operating conditions, the indicator | ||
| sections of | may increase or decrease. | |
To remove the batteries
Remove the batteries as illustrated below.
To attach the battery compartment lid
If the battery compartment lid is detached by an accidental drop, excessive force, etc., attach it as illustrated below.
30