TROUBLESHOOTING
PROBLEM | POSSIBLE CAUSES | SOLUTION |
|
|
|
Excessive oil temperature | Obstruction in one or both auxiliary | Visually inspect and replace hoses |
| hoses | as necessary. |
| Hydraulic oil level on skid steer is | Refer to skid steer owner’s |
| low | manual. |
| Hydraulic oil in skid steer is dirty | Refer to skid steer owner’s |
|
| manual. |
| Hydraulic oil filter on skid steer is | Refer to skid steer owner’s |
| dirty | manual. |
| Relief valve on skid steer is not set | Refer to skid steer owner’s |
| properly | manual. |
|
|
|
Insufficient tilling power | The tines are worn or bent | Replaced damaged tines. |
| Debris has built up inside the | Clean debris from inside of |
| chassis | chassis. |
| Insufficient hydraulic flow from the | Refer to skid steer owner’s |
| skid steer | manual. |
| The hydraulic oil filter on the skid | Refer to skid steer owner’s |
| steer is dirty | manual. |
| One or more seals on the motor | Contact dealer. |
| have failed |
|
|
|
|
14 Troubleshooting | MAN0003 (Rev. 11/30/2006) |
|
|