GENERAL INFORMATION
The purpose of this manual is to assist you in operating and maintaining your tiller. Read it carefully. It furnishes information and instructions that will help you achieve years of dependable performance. These instructions have been compiled from extensive field experience and engineering data. Some information may be gen- eral in nature due to unknown and varying operating conditions. However, through experience and these instructions, you should be able to develop procedures suitable to your particular situation.
The illustrations and data used in this manual were cur- rent at the time of printing but, due to possible inline production changes, your machine may vary slightly in detail. We reserve the right to redesign and change the machines as may be necessary without notification.
Throughout this manual, references are made to right and left direction. These are determined by standing behind the equipment facing the direction of forward travel.
SPECIFICATIONS
| TL52 | TL73 | TL84 |
| Dual Direct | Dual Direct | Dual Direct |
|
|
|
|
Motor | Ross ME180405 AAAB | ||
|
|
|
|
Maximum Pressure | 3300 psi (228 bars) | 3300 psi (228 bars) | 5000 psi (245 bars) |
|
|
|
|
Working Depth | 0 - 6 Inches | 0 - 6 Inches | 0 - 6 Inches |
|
|
|
|
Working Width | 52 Inches (1321 mm) | 73 Inches (1854 mm) | 84 Inches (2134 mm) |
|
|
|
|
Overall Width | 60 Inches (1524 mm) | 86 Inches (2184 mm) | 97 Inches (2462 mm) |
|
|
|
|
Overall Length | 44 Inches (1118 mm) | 44 Inches (1118 mm) | 44 Inches (1118 mm) |
|
|
|
|
Tines | 28 | 36 | 40 |
|
|
|
|
RPM | @12 gpm (46 lpm) | @15 gpm (76 lpm) | @20 gpm (76 lpm) |
| 148 rpm | 247 rpm | 247 rpm |
| @15 gpm (57 lpm) | @25 gpm (95 lpm) | @25 gpm (95 lpm) |
| 185 rpm | 309 rpm | 432 rpm |
| @18 gpm (69 lpm) | @32 gpm (122 lpm) | @32 gpm (122 lpm) |
| 22 rpm | 395 rpm | 432 rpm |
|
|
| @40 gpm (152 lpm) |
|
|
| 540 rpm |
|
|
|
|
4 Introduction | MAN0003 (Rev. 11/30/2006) |
|