Woods Equipment TL73, TL52, TL84 manual Tine Replacement, Service

TINE REPLACEMENT

To replace worn or broken tines (1), remove the 1/2" nut (3) and bolt (2) as shown in Figure 23. Remove the worn or broken tine and replace with a new tine. Install 1/2" x 1-1/2" - 20 bolt (2) and 1/2" - 20 nut (3). Torque to

50lbs-ft (68 N-m). The tine should rotate ±15° when a small force is applied to the tine. If the tine does not rotate, loosen the nut until the tine is free to rotate.

2 3

1

Figure 23.

MAN0003 (Rev. 11/30/2006) Service 19