SERVICE
DRUM REMOVAL
Rotate the tiller so it rests on the attach wings as shown in Figure 5. Use a hoist to support the drum at the midpoint.
DP4
Figure 5.
Remove the two depth skid bolts (1) and four motor housing bolts (2) from one side as shown in Figure 6.
2
1
DP5
Figure 6.
Remove the depth skid and the motor housing from one side as shown in Figure 7. Slide the drum off remaining motor shaft.
Figure 7.
Remove the coupler bolt (3) and the coupler (4) from both sides of the drum as shown in Figure 8.
4
3
Figure 8.
MOTOR REMOVAL
Rotate the tiller so it rests on the attach wings as shown in Figure 9. Use a hoist to support the drum at the midpoint.
MAN0003 (Rev. 11/30/2006) | Service 15 |
|
|