Woods Equipment TL73, TL52, TL84 manual Service, Motor Installation

DP4

Figure 9.

Remove the two depth skid bolts (1) and four motor housing bolts (2) from one side as shown in Figure 10.

2

1

DP5

Figure 10.

Remove the depth skid and motor housing. Place the motor housing in vice (3) as shown in Figure 11.

3

DP8

Figure 11.

Use an extension and a 1/2” twelve point socket to hold motor bolts from the inside and remove the four 1/2” nuts (4) from the bottom as shown in Figure 12.

4

DP9

Figure 12.

MOTOR INSTALLATION

Place the motor housing into a vice (1). Install the motor and orient the motor ports (2) as shown in Figure 13.

2

1

DP8

Figure 13.

Install four 1/2” - 20 x 1-1/2” twelve-point bolts (3) and four 1/2” - 20 (4) nuts as shown in Figure 14 and Figure

16.While using an extension and 1/2” twelve-point socket, hold bolts from the inside and torque nuts to 85 lbs-ft. (115 N-m).

16 Service MAN0003 (Rev. 11/30/2006)