TERMS
WARNING: Alerts user to avoid or correct conditions that could cause bodily injury.
CAUTION: Alerts user to avoid or correct conditions that could cause damage to or destruction of equipment.
TYPICAL INSTALLATION
FLUID HOSE
NOTE: Identifies essential procedures or extra information.
FUEL SHUTOFF
VALVE
~ IHYDRAULIC
HYDRAULIC RETURN
LINE FROM MOTOR
'WHIP END HOSE
)
I
Fig 2
SETU P U;;ti/'WH:nA
NOTE: Numbers in parentheses refer to the parts list on page 19.
1.Install the handle (58) on the back of the cart, us- ing the screws (33) and lockwashers (9) provided.
Pull out the two clips (23) from the pump support pivots and swing the pump (110) down. Put the clips into the forward holes to secure the pump.
2.Install the accessory suction tube, if used. See page 20.
4
3.Connect the Hose and Gun
a.Remove the plastic cap plug from the fluid filter
(88)outlet nipple and screw on the fluid hoses (170a, 170b) and the spray gun (170cl.
b.Don'tuse thread sealant on the swiveling nut of hose couplings, and don'tinstall the spray tip yeti
NOTE: Use thread sealer on all male threads except at swivel unions. Swivel unions are made to