Presetting radio stations4 Press DISPLAY/MENU for 2 seconds or more.

The CD player starts scanning the stations from the lower frequencies and stops for about 3 seconds when a station is received.

5 If you want to preset the received station, press DISPLAY/MENU while the preset number is flashing.

The received station is preset on the preset number 1 and the CD player starts scanning for the next receivable station. If you do not press DISPLAY/MENU within the 3 seconds, the CD player will start scanning for the next receivable station without storing the station.

6 Repeat step 5 until all receivable stations are preset.

If the stations have already been stored, the newly preset stations will replace the old ones.

Presetting stations manually

1Press RADIO ON/BAND to turn on the radio.

2Press RADIO ON/BAND to select the band.

3Press and hold MEMORY until the preset number flashes in the display.

FM01 87.50 MHz

From this step on, start the next operation within 30 seconds after you finished the previous operation. If 30 seconds pass with nothing done, the preset number stops flashing which shows that the CD player has exited the preset memory standby mode. If this happens, start from step 3 again.

4Push the 5-way control key toward . or > repeatedly to select the preset number you want to store the station on while the preset number flashes.

5Press TUNE + or – ( + or – for the remote control) to tune in the station you want while the preset number flashes.

6Press DISPLAY/MENU.

When the station is preset successfully, the beep sounds. The new station replaces the old one.

The preset number increases by one and the CD player enters the preset memory standby mode.

7Repeat steps 4 to 6 when you preset the stations in the same band. When you preset the stations in the different band, press and hold MEMORY to exit the preset memory standby mode. Repeat steps 2 to 6 after the preset number stops flashing.

30