To exit the preset memory standby mode

When the radio is turned on, you can exit the preset memory standby mode using one of the following procedures. Preset stations, however, will remain stored in the CD player’s memory.

•Hold down MEMORY until the preset number stops flashing.

•Do not press any button for 30 seconds. The preset number stops flashing.

•Push the 5-way control key toward u. The CD player enters the CD playing mode.

•Push the 5-way control key toward x/ CHG. The radio turns off.

To cancel all preset stations

1While the radio is turned off and CD playing is stopped, press and hold DISPLAY/MENU until the MENU screen appears.

2Turn the jog dial to select “OPTION,” then press DISPLAY/MENU.

3Turn the jog dial to select “TUNER PRESET,” then press DISPLAY/MENU to enter the selection.

“Clear?” appears in the display. When you press DISPLAY/MENU, all the preset stations are canceled.

Playing preset radio stations

You can tune in the station easily by pushing the 5-way control key toward . or >.

1 Press RADIO ON/BAND to select the band.
2 Push the 5-way control key toward.or > to tune in a stored station.

Changing the tuning

interval (Except European andChinese models)

When using the CD player abroad, change the AM tuning interval on the menu, if necessary.

9 kHz area: Asia and Europe

10 kHz area: the U.S.A., Canada and South America

Change it while the radio is turned off and CD playing is stopped, as follows.

1 Press and hold DISPLAY/MENU until the MENU screen appears.2 Turn the jog dial to select “OPTION,” then press DISPLAY/ MENU.

3 Turn the jog dial to select “AM STEP,” then press DISPLAY/MENU to enter the selection.

4 Turn the jog dial to select “9 kHz” or “10 kHz,” then press DISPLAY/ MENU to enter the selection.

Note

After changing the tuning interval, you need to preset radio stations again.

the Using radio

31